Tools - Kiln - Paragon - F-500Guillotine - Lampworking Glassblowing - NEW

Description

The kiln is designed for annealing large glass figurines, beads, and marbles and is made at the Paragon factory in Mesquite, Texas USA. The interior is 24" wide, 22 1/4" high, and 18" deep. Imagine the huge glass pieces you could make with a kiln this large.
The massive F-500, with its towering door counter-weight and handsome black finish, is a true workhorse kiln that will raise your production. The F-500 simplifies annealing so you can immerse yourself in creating breathtaking ware.
Raise the counter-weight vertical-drop door to insert glass on a punty rod. Lower the door. The punty rod extends outside the firing chamber through a smaller punty rod door. The door is balanced so it stays open where you stop it. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller.
The punty rod doors retain the heat
The main door includes two 4" x 10 1/2" punty rod door openings. Two flexible gaskets under each door help to retain the heat. The rods can extend outside the kiln through the gap under the doors. This allows the doors to remain fully closed. The ceramic fiber punty rod doors are a full two inches thick to help retain heat.
Rare-earth magnets hold the doors in the open and closed positions. Specifications:
Max. Temperature: 1200F, 648C
Amps: 29
Phase: 1
Watts: 6850
Nema: 6-30R
Breaker Size: 40 Circuit
Wire Size: 8 gauge
Certified to CSA & UL Std 499
Control Type: Sentry Digital 3-key Glass Control
Voltage: 240
Hertz: 60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.
Sides Chamber Volume 5.50 CU.FT. 155.74 litres
Chamber Width 24.00 IN, 610 mm
Chamber Depth 18.00 IN, 457 mm
Chamber Height 22.25 IN, 565 mm
Outer Size 35.00W x 29.00D x 38.00H Inches 889W x 737D x 965H mm
Ship Size 42W x 42D x 65H Inches 1067W x 1067D x 1651H mm
Ship Weight 601.00 Lbs. 272.61 Kg.
Doorway Clearance Needed 29.00 Inches 736.60 mm
Ship Method This Kiln Ships Via Truck
This plug and play PID Programmable Ramp and Soak (60 segments) temperature controller with Ceramic thermocouple, has a wide range of applications in controlling the temperature of Kilns, Ovens, Furnaces, pottery, Glass, Annealing, ....
(for loading current up to 15Amp) . This is an inexpensive and heavy duty plug and play controller box.
All products are 100% Brand new, High performance and Top quality.
Controller comes in Box with
MANUAL
.
Guarantee your
Insured
Undamaged
shipping by purchasing from a Canada located seller.
Ready for Immediate Shipment.
Features & Specifications
:
·
Its heavy duty kiln thermocouple can measure very high temperatures up to 2372 °F (1300 °C).
·
To operate, you only need to plug the heater to the socket wire of the controller at the back, drop the sensor into the Kiln, turn on the power of controller and adjust it to your own requirements.
·
15 Amp Maximum current
·
Heavy duty input and output plug and socket wire
·
Equipped with
circuit breaker
switch 15Amp (instead of short life fuse)
·
Equipped with
Thermocouple male and female connector for changing thermocouple and also wall mount box ear for easy installing on oven or wall.
·
Temperature controller features:
- Configurable between
Fahrenheit and Celsius
- 30 Ramps and 30 Soaks and time can configurable between
minute and second
- Equipped with differential gap,
decimal point for all input
, Auto tuning (with learning stop or start),alarm output configurable with 8 different options, system function (heating or cooling),......
Specifications
:
Input voltage
90 to 265 VAC - 50 /60 Hz; No transformer or adaptor is required.
Output voltage
Same as the input.
Maximum Current
15A
Controller Mode
60 segments Ramp and soak PID control
Output switching device
Solid State Relay (max 15A - 24/240V AC) with zero voltage crossing switching.
Sensor Type
Type K 6pc Ceramic Kiln Thermocouple
Temperature control range
50 to 1300 °C
Thermocouple Thread material
Cr-Ni, Si-Ni
Thermocouple Thread dimensions
3.2mm (diameter ɸ) x 190 mm (long) / (0.13" x 7.5")
Sensor cable length
3.3 ft (1m)
Ceramic tube shape
6 x (1 inch Pcs, two-hole insulator) Ceramic Tube
Ceramic tube diameter
Oval shape: L=12.3 mm & W=10mm (L~ 0.5” & W~ 0.4”)
Ceramic tube length
~150 mm (~ 6.0 inch)
Box material
ABS
Temperature resolution
Dual 4-digit LED display, 0.1 °C.
Temperature display unit
Celsius (°C) and Fahrenheit (
°
F) configurable
Temperature accuracy
±0.5%F.S
Dimension
200x120x75mm ( 7 3/4 x 4 3/4 x 3" )
Temperature controller specification:
Available Segments
Up to 60 segments available for a program
Detective Temperature Range
-200 to 1800 °C (depends on input type)
Patterns
Be able to program different patterns with different segments
Input
Thermocouple: (K,S,E,J,T,B,N)
RTD: (Cu50, PT100)
Linear Voltage and current:0-5V,1-5V,0-1V,0-100mV,0-20mV,0-60mV,0.2-1V(100-500mV),-20 -+20mV(0-10V) -5V- +5V(0-50V), -100 - +100mV(2-10V)
Linear Resistor:0-80 Ohm, 0-400 Ohm
Output
Voltage pulse to drive SSR
Control action
Heating , Cooling
Response time
Less than 0.5S (configurable)
Accuracy
0.2%FS+- 0.1C(Cu50 cooper resistor compensation or ice point compensation)
0.2%FS+0.2C (TC input and internal compensation)
Temperature drift
Less than 0.01%FS
0
C (Typical value is 50ppm/
0
C)
Resolution
1
0
C or 0.1
0
C(automatically change to 1
0
C when the temperature is higher than 999)
Display
Dual line - four digit - LED display
Decimal points
Configurable for all inputs
Control Method
ON/OFF
AI MPT with auto tuning, adopting fuzzy logic PID algorithm
Auto/Manual Control
Auto/manual bump less transfer from front panel
Auto-tuning
Auto-tuning and manual tuning available
Alarm Mode
Absolute value high limit, Absolute value low limit, Deviation high limit alarm, Deviation low limit alarm.
Alarm stand by
In some occasions, for example, in the heating process, when the alarm is set to as low deviation alarm, right after the power is turned on, the alarm will be triggered but there is no problem in the system, the alarm block function can solve this problem.
Soft start function
In some particular application, 100% output ratio is not allowed when the power just turned on; soft start function is a great feature to solve this problem.
Temperature display unit
Configurable between Fahrenheit and Celsius
Power Supply
90~260VAC
Dimension (DIN 1/16)
48mm*48mm*90mm
Mounting
Panel Mount
Notes for customer outside North America,
For international order, an US power cord is included. User can cut plug and socket wire and change it to the power plug and socket outlet that meets the local standard for the input and output.
For countries that use 220-240VAC power line, the maximum control power of this controller is 3300 Watts.
Our shipping service is fast for example:
shipping to USA is 3-6 business days
shipping to England and Ireland is 4-7 business days
shipping to other Europe Countries 5-10 business days
shipping to Canada is 2-7 business days
shipping to Australia, New Zealand and Asia takes longer than other countries (17-25 Business days)